1/2-inch drywall is the most common drywall thickness. You can use this type of drywall for the vast majority of projects, including on walls and ceilings, although it’s a little too thick for most curved walls. 1/2-inch drywall is also available in the widest range of lengths and widths, including both standard and alternative drywall sizes.
Another thing we wondered was; what drywall thickness to use?
The most common thickness of drywall used in residential interior construction is 1/2 inch. Thin drywall, commonly 1/4- or 3/8-inch-thick, can be bent around curved surfaces. Fire resistance, fire-resistant drywall is available in both 1/2-inch and 5/8-inch, and wall repair are a couple additional ideas to keep in mind.
One answer is that requires mining and burning of fossil fuels. The chemical process needed to manufacture it produces greenhouse gasses. Not impact resistant. Disposal methods are tedious. When it degrades it has the potential to create hazardous gasses. Manufacturers have a history of price gouging and have settled lawsuits many times.
You might be asking “How thick is drywall in a house?”
My answer is drywall typically covers both sides, and it’s usually 1/2 inch thick, which makes the wall 4 1/2 inches thick. And a Few Words on Drywall Thickness However, other types of drywall come in different thicknesses; the most common are 1/4 inch, 3/8 inch, 1/2 inch and 5/8 inch.
What is the standard size of drywall?
These are determined by the needs of the architect, builder, and client. The most common size of drywall is 4 feet wide and 8 feet long. Since 1/2-inch thick sheets of 4- by 8-foot drywall tip the scales at 57 pounds, this size tends to be the biggest sheet that most do-it-yourselfers can carry and lift into place.
¼ inch drywall = 1 inch to 1 ¼ inch long screws½ inch drywall= 1 ¼ inch to 1 ⅝ inch long screws⅝ inch drywall= 1 ⅝ inch to 2 inch long screws.
Does drywall mud need to be thinned?
Drywall mud, or joint compound, is applied in a thin finish coat and textured to give the walls more dimension. The mud comes as a thick paste in either a bucket or bagged in a box. It’s too thick to use for texturing as it is, so it first requires thinning with water. Consequently, can you add water to drywall compound?
Also, should you drywall the ceiling before the walls?
The most common answer is: yes, you should install drywall on the ceiling before the walls for multiple reasons : The drywall on the walls can support the ceiling pieces. You can create tight and fitted corners more easily. The pieces are easier and faster to work with from the top.
How much water do you add to drywall compound?
If you’ve just opened a bucket, remove about a quart of the joint compound to make room for water. Then add about two or three cups of water and start mixing the compound. The best consistency for joint compound depends on its purpose. Also Know, do you have to mix drywall compound?
Sprinkle enough powdered joint compound over the top of the runny mix to create a thin layer. Submerge the paddle mixer into the joint compound. Check the wallboard joint compound consistency to determine if sufficient thickening occurred. Is mesh or paper tape better for drywall?