While cheaper, the drying times are significantly longer; a week versus overnight, for example. Quick curing concrete mixes come pre-packaged and you only add water. ” Quikrete,” for example, comes in a 50-pound bag and takes only **24 hours** to cure. The general consensus is that you use the concrete that best suits your project .

So, how long does it take for locktite to set?

H. How long does it take for Loctite PL 530 to dry? Loctite PL 530 forms a strong, permanent bond is formulated to bond in wet and humid areas. It sets in just **15 minutes** with a full cure time of 48 hours.

## How to figure how much quickcrete I need?

Determine how thick you want the concrete

Measure the length and width that you’d like to cover

Multiply the length by the width to determine square footage

Convert the thickness from inches to feet

Multiply the thickness in feet by the square footage to determine cubic feet

Convert cubic feet to cubic yards by multiplying **by .037.**

How much Quikrete do I need calculator?

The calculator will indicate the number of **80 lb bags** of QUIKRETE® Base Coat Stucco and Finish Coat Stucco you will need to construct your stucco wall using a traditional 3 coat or 2 coat application process. (All yields are approximate and do not allow for uneven application thickness, waste, etc.).

How many 80 pound bags of Quikrete make a yard?

You will need 45 bags of concrete mix to make a cubic yard of concrete. An 80 lb bag ( ** 36.3 ** kg) of concrete mix yields approximately 0.60 cubic feet (17L) There’s 27 cubic feet of concrete in a cubic yard. If you divide 27 by.60 it equals 45 bags.

## How long does it take for Quikrete to harden?

Depending on the amount you use, quick-drying Quikrete concrete can set in as little as ** 10 minutes, ** although the common time for larger projects is between 20 and 40 minutes [source: Pavement Package].

How long does it take 4000 psi concrete to cure?

For example, if a project specifies4000 psi concrete, the concrete does not have to reach that ** level of strength for28 days. ** Typically, it is expected that a concrete mix will reach50% of its design strength in3 days,75% in7days, and100% at28 days, as determined by breaking concrete test cylinders that are made on the day of placement.

Quikrete, or rapid-set concrete, is just as ** strong ** as regular concrete and able to withstand similar force. Quikrete offers different PSI strength ratings from 4,000 PSI to 6500 PSI. Regular concrete PSI ranges from 2,500 to 5,000 except for engineered concrete strength which can be up to 10,000 PSI.