The most popular grout line sizing for 3” x 6” subway tiles is 1/16” and 1/8”. This is especially the case for walls but will depend on the look you are aiming for with your tiling. When using thinner grout lines, unsanded grout is recommended and works better with more delicate tile surfaces like ceramic and glass.
3/16” A large tile, such as 12×24”, usually requires a 3/16” grout line, so it’s best to check the manufacturer’s recommendations to see how small you can go.
The Tile Council of North America and accompanying tile organizations recommend an average grout joint width of 3/16 inch for every 1/16 inch variation in the size of the tiles.
This is what our research found. if you want a standard look, tile installers recommend grout lines of 1/16 inch for walls and 1/8 inch for floors. For regular-format tiles, between 12 by 12 and 16 by 16 inches, you can stay with those measurements or go up to 3/16, depending on the tile and the look you want.
INSTALLATION Grout Joint Recommendation Shade Variation 4×16 & 4×12 Wall:1/16” (When rectangular size is installed in a staggered brick-joint pattern, overlap should not exceed 33%.).
How to choose the right Grout size for your tile?
Your options include: Match grout color to the corresponding tile, so as to not introduce any new colors to the overall design that might not work. Use a single grout shade that will work for both tile styles — a mid-toned gray is a safe choice. If your color scheme permits, contrast your grout colors with the other tile colors in the space.
What size should I Make my tile grout joints?
Are the edges of the tile linear or irregular (e. g. “hand-molded”)? How big is the tile? What is the surface of the tile; can it be easily scratched? Where is the tile being used? Is the surface level?
, project summary Select the right grout for the job. If needed, select a grout additive. Add water to grouting powder in the manufacturer-recommend ratio. Tilt mixing bucket and stir with a grout-mixing knife. Adjust grout consistency by adding more powder or water. Let grout rest (slake) for up to 10 minutes. Use a grout knife to mix thoroughly once more.
Safe for most types of stone, ceramic tile, and grout. No-sheen, non-slippery finish. Safe in food-prep areas.
What is the best subway tile?
“Our favorite source for subway tile is Heath Ceramics. Depending on your selection, their Classic Field tile has different degrees of color variation, but it is in these color variations that a sense of depth, warmth and visual interest is found. Just make sure you have an installer that understands the concept of color modulation.”.
How do I seal the grout on the subway tiles?
Wipe the tile edges with a damp sponge and seal the grout lines. Alternatively, you can use painter’s tape to cover the beveled edges of the tile, which keeps the grout from getting stuck in any.
What size notched trowel for 12×24 tile?
With your 12×24 tiles you should use a 1/2″ notched trowel on the wall and back butter each tile, but just with a skim coat. Tile trowels come in many shapes and sizes, generally starting out from a 3/16″ v-notch up to the 1/2″ square notch.