Cut the plywood across the bottom of the grooves with a wood chisel and hammer to remove the section of plywood at a groove. Cut a piece of one-by-six pine 36 inches long as a stabilizer for the stands.
Cut slits in the bottom of the cutout several inches from each side and 4 inches deep. Cut matching slits on the top of each half of the folded cardboard. Unfold the cardboard slightly and match the slits up on the stand and the cutout, on the back of the cutout. The fold of the cardboard points out, so together it forms a triangle with the cutout.
Position a pair of stands 36 inches apart and parallel. Place the pine flat atop the stands at one of the angled sides. Attach each end of the pine to the corresponding stand with a pair of deck screws. Stand a sheet of 1/2-inch interior-grade plywood in the grooves of the stands and center it each way.
Place the clean wood on a level surface, and then stand the cutout in front of it so the wood touches the bottom back side of the cutout — the wood should be centered behind the cutout. Staple the cutout to the wood every few inches near both the top and bottom of the board.
How is plywood different from regular wood?
When choosing plywood or a plywood alternative, consider these features as well: Stainable plywood provides an already sanded surface that accepts stain well to create a natural-looking finish. Paintable plywood readily accepts paint and laminate for a unique and customized appearance. Pressure treated plywood resists damage from water, weather, decay and insects., and more items.
The strength of solid wood is higher than ordinary plywood. Plywood is made up of multiple thin sheets of wood that are glued together with adhesive. From moisture and heavy pressure, individual veneers can fall apart. Therefore, plywood does not have the great strength as solid wood.
You might be wondering “Is plywood the same as hardwood?”
Hardwood plywood (often simply referred to as ‘plywood’) is a type of wood that is actually manmade – so technically it is not actually a natural wood, but rather is an engineered wood product. Plywood is made by sticking three or more boards (veneers) of wood together with some sort of adhesive.
What is the best paint for plywood?
, pickling Pickling followed by varnish coating. Varnish coating, while maintaining the natural look of the veneer, and paint application.
Applying this kind of stain has a couple of methods. B) Ragging the stain: Ragging the stain on the plywood is the second option you can try. For this, you will need a lint-free rag. C) Use a Gel Stain to Make it Dark: For staining birch plywood dark, the third option is the good one and it is called “gel stain”.