What kind of grout do you use for marble?

, and unsanded grout. Unsanded grout is often the best choice for smooth, polished tiles like marble, even if the joint width is 1/8 or larger. Usually, most contractors use an epoxy-based unsanded grout in these situations – not traditional sanded or unsanded grout.

One of the next things we wanted the answer to was; do you seal marble before grouting?

Well, You should definitely seal your marble tiles before grouting. This is because these tiles are fairly porous. Thus if you don’t seal them before grouting, they might get stained. There’s a chance it might discolor it! These tiles are also prone to water damage. This is just a hint of what we have packed ahead for you.

Which grout to use?

Choose sanded grout for larger gaps between tiles. Sanded grout is best used for gaps (called grout joints) that are larger than 1⁄8 inch (3.2 mm) in width. This type of grout has been mixed with fine sand, so it’s better able to fill a large joint instead of shrinking.

Use adhesive instead of groutdoubletiger, and ian. What adhesive have you used? Come and introduce yourself in the new members section. Is this a shower area Mr Tiler. Why would dispersion be ok compared to cement Geoff? The Legend; Phil Hobson RIP. Adhesive is adhesive, grout is grout. A few more things to look into: andy allenthe d, widler, or adhesive is adhesive, grout is grout.

What is the best brand of grout?

Kerakoll Fugalite® Bio, green Building rating of 3. The Kerakoll Fugalite® Bio is the only epoxy grout on this list with a Green. Building rating of 3. Suitable for exterior applications. You can install the Kerakoll Fugalite® Bio epoxy grout outdoors due to its high resistance to UV rays. Certified durable epoxy grout, and dermatologically tested in addition could be usefull too.

You might be wondering “What are the best ways to grout over existing Grout?”

One answer is that scrape all the bits of old grout before you begin. You can use a vacuum to ensure the surface is thoroughly cleaned. Wash the floor or walls to remove dirt. Mix the grout as per the instructions and use a grout float to spread it evenly into all the joints. Wash the area with a damp sponge and smoothen the joints, and more items.

Why do you need Grout when you install tile and stone?

After laying the stone tile, you need to grout the joints to keep dirt and water out and to enhance the beauty of your new tiled surface. Grouting can be messy, but proper preparation of the tile can keep mess to a minimum. Seal your raw stone tiles before grouting.