Fine-thread drywall screws are best for installing drywall to metal studs. Coarse threads have a tendency to chew through the metal, never gaining proper traction. Fine threads work well with metal because they are self-threading.
You could be wondering “Why do I use drywall screws?”
Screws or nails popping out of the wall indicate that the drywall is not properly secured to the frame in that area. Simply screwing or nailing the fasteners back into the wall won’t fix the problem. Instead, you need to insert new fasteners in an undamaged spot near the popped fastener to secure the drywall.
What are the best drywall screws?
The Milwaukee 2866-20 M18 FUEL Drywall Screw Gun is our pick for the best overall drywall screw gun. Some additional ideas to take a look at: dewalt cordless drywall screw gun, dewalt dry-wall screw gun – premium choice, or makita fs6200 drywall screwgun.
Moreover, what length of drywall screws should I use?
I found the answer was the recommended length of screw for working with standard drywall is 1 ¼ inches. This is the most common length of screw people use for drywall projects to attach the drywall sheeting to wooden wall studs. For thicker drywall measuring ⅝ inches, you should use screws that fall into the range of 1 ⅝ and 2 inches in length.
These screws have a flat head that allows them to screw down flush with the drywall’s surface. Each stud will require several drywall screws to make sure it is firmly in place. Expect to put between 32 and 34 screws into a 4-foot by 8-foot sheet of drywall. Drywall screws will cost $6 for a one-pound pack.
How do you screw a screw into drywall?
Plaster wall: anything under 20-pounds can be hung with a plastic expansion anchor. Use a molly bolt for anything weighing more than 20-pounds. Drywall: use a threaded anchor screw for anything weighing less than 20-pounds. Anything weighing more should be anchored with a molly bolt. Concrete or brick and mortar walls require expansion anchors.
This means that in a standard home construction, you would need about 28 screws to attach said 4×8 foot piece of drywall properly. That’s in the instance of a drywall panel going onto a wall. If it is going into a ceiling, you need to add 8 more screws for a total count of 36 screws.
The short answer, it depends on your municipality. The general answer, you should use at least one drywall screw every 10-12 inches. This means for a 4 x 12 sheet of drywall you will probably use around 50 screws for the entire sheet. When using drywall adhesive, you can use much less screws but you will still need to consider the following points?