The best plywood for flooring depends on multiple factors such as the type of finished flooring, the size of the joists, the joists spacing and moisture levels. In my experience as a custom home builder, traditional plywood is the best for flooring followed by CDX and then OSB. A strong subfloor is a very important part of building a strong house.
Some articles claimed my wife normally helps with the remodeling, but she’s currently sidelined with a hip injury. Use a caulk gun to spread the construction adhesive out on the back of the panel. A couple more ideas to look into are: why no payoff shot? Installation, and finish options.
Which plywood should I use?
BWP grade plywood stands for Boiling Water Proof plywood, which is known to be completely water resistant. MR grade plywood stands for moisture resistant grade.
Can you lay plywood over concrete floor?
It is perfectly fine to install plywood over an existing concrete floor, provided it is dry. It is important to check the moisture level and ensure that it is below 6% before you attach any type of subflooring, especially plywood. Otherwise, you may have to give it more time to cure.
How to install concrete over plywood substrate?
You have your needed materials and tools handy and now you’re ready to begin installing backerboard like a pro.5 Secure Backerboard with Screws. Drill screws through the backerboard sheets every 6 to 8 inches. A couple extra items to examine are: 7 cover the joints with fiberglass tape, and 8 cover fiberglass tape with mortar.
Moreover, can you put plywood over concrete subfloor?
As with a floated subfloor, NWFA recommends a vapor retarder for glue-down subfloors when installing ¾” wood flooring over concrete. After installing a vapor retarder (if necessary), cut your plywood panels into 2’x8’ or 4’x4’ sections. The NWFA recommends plywood with a minimal thickness of ¾”.
One source stated It is even possible to install a plywood and batten subfloor over a concrete floor that isn’t level and plane, although you need to have a means of verifying that you are shimming the battens correctly, such as a laser level. This method should not be used if ceramic tile is to be applied over the subfloor.
Can you put wood plank flooring over concrete?
You can install a wood plank floor over concrete if you first install a layer of 3/4-in., and plywood. We show you the best way to do it. Lay a plastic moisture barrier and then screw 3/4-in. Plywood to the concrete. Nail the 3/4-in. Wood planks to the plywood.
How do you install hardwood flooring over concrete slab?
You will need a barrier that is appropriate for the flooring you choose: Floating Floors – Typically, these moisture barriers are made from plastic. Nailed Floors – You will need a moisture barrier that protects the subfloor as well as the flooring. Glued Floors – A heavy coat of moisture barrier will be required since the flooring is glued directly to the subfloor.
Things You’ll Need, humidity meter Tar paper or 6-mil polyethylene3/4-inch exterior-grade plywood or 3/8-, 1/2-, or 5/8-inch plywood.
Another question we ran across in our research was “Can you put a 3/4 wood floor on a concrete slab?”.
Nail the 3/4-in. Wood planks to the plywood. If you love solid wood floors and your home rests on a concrete slab, you’re not out of luck. But it’s considerably more difficult to install a 3/4-in. Wood floor over concrete than over a wood subfloor.