How much should hardwood flooring cost?

Solid Hardwood flooring cost range from $2–$16 per square foot — most homeowners opt to spend spend between $8 and $12 for a mid-grade product. Prices vary significantly by wood type and quality. From the lowest to highest, expect to pay $1350 and $11,500 for wood flooring depending on your choices.

Written by HomeAdvisor. Most hardwood flooring installers charge between $6 to $12 per square foot at an average cost of $8 per square foot. High end jobs may run as high as $13 to $25 or more per square foot. Total project costs typically fall between $2,492 and $6,760 or $4,541 on average.

You might be thinking “How much extra hardwood flooring should you buy?”

You would need to purchase 12 or 13 cartons of the flooring choice, depending on the complexity of the room and your installer’s experience, to be able to cover the entire space. When it comes to flooring, too much is always better than too little.

Another inquiry we ran across in our research was “What is the cheapest hardwood floor?”.

Pine is the cheapest hardwood with average prices of $2 to $4 per square foot not including installation. Certain high-end engineered hardwoods are priced between $10 and $13 per square foot such as Engineered Heart Pine or Engineered White Ash. To help guide your decision, here are some of the commonly used and requested solid hardwood species.

Then, what hardwood floors are most durable?

This is tougher and less elastic, often referred to as a water-based finish. Urethane (water-based) This finish dries clear and is generally favored for its ease of use and cost-friendliness. Urethane (oil-based) T hese finishes give a high-gloss shine and are among the most common in the industry. A few additional things to think about are shellac, and lacquer.

Should I put hardwood floors in my Kitchen?

Putting hardwood floors in your kitchen will look luxurious. , and great choice. When building your kitchen, we almost always recommend installing your flooring before adding any cabinetry or appliances.

Do I need to finish hardwood floor before installing appliances and cabinets?

Whether you sand and finish the hardwood flooring before installing the appliances and cabinets is up to you. But the water resistance somewhat provided by the finishing will potentially save the flooring should there be a spill that leaks under the cabinets. Thanks for the tip Mrtimewise.

Should you install kitchen cabinets before or after floors?

If you’re installing your cabinets before your floors, you’ll need to measure the height to make sure there is enough room for your flooring to slide underneath your appliances. Some people put plywood in the place of the flooring to give an estimate of how much extra space will be needed between the top of the cabinets and the appliance.

Does hardwood flooring need underlayment?

Underlayments are also important for engineered hardwood flooring because: ●It allows the floor to move slightly with no problem. Since it hovers, that will sometimes happen. With an underlayment, there is no problem.

This of course begs the inquiry “Is felt underlayment necessary when installing hardwood floor?”

Although the felt is impregnated with asphalt, it isn’t waterproof; it’s not supposed to be. Felt slows moisture transfer, giving water a chance to evaporate before it reaches the hardwood floor. Felt underlayment is appropriate over a wood substrate, but it is not recommended over concrete.

This of course begs the inquiry “What kind of Underlayment is best for your floor?”

The type of underlayment you choose will depend largely on the type of flooring you want. A couple additional ideas to look into are: vinyl flooring underlayment, laminate flooring underlayment, carpet flooring underlayment, fastened hardwood underlayment, floating hardwood flooring underlayment, self-leveling underlayment options, or underlayment installation tips.

Do hardwood floors need to get glued to subfloor?

To be able to glue your hardwood floor down the subfloor must be a solid and sound structure, for example, concrete or wooden floor boards. Place the hardwood flooring planks on top of the adhesive and push them together. There is no need to glue the planks together as they are fully bonded to the subfloor.

Does hardwood flooring go under cabinets?

The hardwood just flows underneath the cabinets. Safer on cabinets. Very importantly, you can avoid potential nicks or stains to your cabinets that could happen during the demo, install, and/or sanding process for the floors.

When I was reading we ran into the question “Can you put cabinets over hardwood floors?”.

Some people put plywood in the place of the flooring to give an estimate of how much extra space will be needed between the top of the cabinets and the appliance. This isn’t ideal. Instead, we suggest installing your cabinets over your hardwood floors. This saves you the hassle of measuring and reduces the risk of error.