Tools Used For Installing Laminate Flooring The miter chop saw is good for cutting trims and moldings. As far as cutting laminate flooring It is hard on the blades. A sliding miter saw is better for cutting laminate flooring.
When using a saw for a woodworking project, using a sharp blade is the best way to complete the task. However, you also need to consider the type of saw when cutting laminate flooring. The most hassle-free and straightforward way to cut such a material is to use a power miter saw.
Can you cut laminate flooring with a jigsaw?
A jigsaw is a handy tool for cutting laminate flooring, but it’s also vulnerable to chipping the surface coating. For this reason, it’s best to cut from the back of the board when possible., and contents show .
This of course begs the question “Can you cut laminate flooring with a knife?”
You can cut laminate wood flooring with a utility knife. The utility knife has all the power and cutting capacity to cut through laminate wood flooring whilst not chipping the blade off.
How to cut laminate flooring with a jigsaw?
You will want to use either a medium or fine toothed jigsaw blade to cut the laminate flooring, making sure the exposed side is up while you are cutting.
This tool is easy to use, but is not good for laminate boards. Unlike electric saws, you are completely in control of the direction of the blade. If you adjust the angle of your hand, even slightly, then your straight cut can become crooked. Return to Top.
Overlap the tape by about 1/4 inch, being sure not to leave bare spaces. Measure and draw the shape you need to cut on the tape with a tape measure and a pencil. Insert a laminate- or metal-cutting blade into the jig saw. Support both ends of the board rather than just letting one end hang over the edge of the workbench.
How do you cut laminate flooring by hand?
You simply use leverage to cut the pieces, putting force down on the blade to cut the flooring. I have included a couple of pictures so you can get an idea of what they look like and how they work.
While we were reading we ran into the question “What is the best tool to cut laminate flooring?”.
This is the ideal tool and can cut perfect 90 degree cuts or any other angle, up to 50 degrees for most saws. You can use either a sliding model or a non sliding model, just make sure the blade is large enough to cut the entire width of the laminate flooring in one pass.
As for the direction of the teeth, many blades designed for cutting laminate come with a “reverse cut” orientation. This means that instead of cutting up through the piece, the teeth slice down into it – and any splintering or chipping should happen on the bottom side.
What is the best miter saw blade for laminate flooring?
The eight diamond-tipped teeth on the Norske Tools NCSBP284 miter saw blade are ideal for getting through hard materials like concrete and the abrasive wear layer of laminate flooring. The 12-inch laser-cut blade resists abrasion and features anti-vibration slots to help prevent the blade from jumping and reduce sideways movement while cutting.
How to choose the right jigsaw blade for laminate floors?
As mentioned, laminate has a plastic finish on top that is prone to chipping – and choosing the right blade will go a long way towards preventing it. Jigsaw blades come in two different alignments: set teeth vs ground teeth.
Can you use a jigsaw to install laminate around a toilet?
If you have to install laminate around a toilet or any other rounded object, a jigsaw is the perfect tool to have. The steps are almost the same as cutting straight, with two main differences: you can’t use a guide, but you can make a paper template.