# How carpet area is calculated?

Measure the length using the distance from one wall to the opposite wall. Measure the width from wall to wall. Add 2 to 4 inches to each side. This accounts for waste, doors and slanting walls. Multiply the length times the width or enter those into the calculator above. This is your total square footage for that room. Repeat this process for each room.

Built – up area is the total area measured on the outer line of your flat, including balcony, terrace, etc. Built-up area, covered area, built up area vs carpet area, carpet area measurement, super area and carpet area, total built up area, or super built up area as well may be helpfull too.

Another popular query is “How to measure area for carpet?”.

You see, and revenue department to calculate the stamp duty on the bases of carpet area instead of super area.

What is the ratio of carpet area to Super area?

It is also called the saleable area. Depending upon your builder, the carpet area of your flat can be anywhere from 50-80% of the super built – up area (explained below) quoted to you by your builder. Therefore, you should always ask your builder for the ratio of carpet area to the super built – up area.

This is what I ran into. carpet area is the precise area that can easily be covered by a carpet within a house and is the area of the house excluding the thickness of the inner walls. If you had to lay out a wall-to-wall carpet in your entire house, the area covered would be the actual carpet area. It is the actual area you get to use in your house.

The carpet area is around 70-85% of the total Built-Up Area. For example, If the build-up Area is 2000 sq ft, the actual usable carpet area will be as per 70% of the Built-Up Area which is 1400 sq ft. Built-up Area is the total area cover by the apartment.

## What is the difference between built-up area and carpet area?

Carpet area is the area that can actually be covered by a carpet while built-up area is the area that comes after adding carpet area and wall area. Was this article useful?

Carpet area is the area that is used by the owner of the house whereas the built up area includes the areas covered by walls or exclusive balconies Super built-up area casts the net wider to include common areas as well.

Another common query is “Do builders take carpet area into consideration?”.

Some Builders take into account the carpet area while charging you, but this is only in the rarest of the rare cases. 90% of the developers calculate the base cost on the basis of the super built-up area; the more the amenities the higher the super built-up area.

## How to calculate Super built-up area?

Formula to calculate super built-up area. Super built-up area = Built-up area + proportionate common area. Super built-up area = Carpet area (1+loading factor) Note: The loading would be in the range of 15% to 50%, depending on builder and the exact location. Super built-up area calculation example.