1/2-inch drywall: Use 1 1/4-inch or 1 5/8-inch drywall screws 5/8 -inch drywall: Use 1 5/8-inch or 2-inch drywall screws By way of comparison, screws intended for construction generally range from 1 inch to 8 inches long.
While we were writing we ran into the question “What length drywall screw for 1/2 drywall?”.
Having the right drywall screws is one of the most important aspects. Drywall nails or screws should be at least 1 1/4 inches but no longer than 1 3/8 inches long for 1/2 inch drywall. Nails should be ring shank in nature to improve security and reduce the risk of the screw or nail popping out.
1/4-inch drywall: Use 1-inch to 1 1/4-inch drywall screws
1/2-inch drywall: Use 1 1/4-inch or 1 5/8-inch drywall screws
5/8-inch drywall: Use 1 5/8-inch or 2-inch drywall screws.
The recommended length of screw for working with standard drywall is 1 ¼ inches. This is the most common length of screw people use for drywall projects to attach the drywall sheeting to wooden wall studs. For thicker drywall measuring ⅝ inches, you should use screws that fall into the range of 1 ⅝ and 2 inches in length.
When I was reading we ran into the query “What size screws are for holding drywall on a ceiling?”.
¼ inch drywall = 1 inch to 1 ¼ inch long screws½ inch drywall= 1 ¼ inch to 1 ⅝ inch long screws⅝ inch drywall= 1 ⅝ inch to 2 inch long screws.
What are the best drywall screws?
The Milwaukee 2866-20 M18 FUEL Drywall Screw Gun is our pick for the best overall drywall screw gun. A couple extra items to examine are dewalt cordless drywall screw gun, makita fs6200 drywall screwgun, or dewalt dry-wall screw gun – premium choice.
One more inquiry we ran across in our research was “What is the best spacing for drywall screws?”.
Drywall screws are manufactured in various sizes to better accommodate each individual job. Additional layers of drywall can be installed on top of each other to boost insulation, soundproofing and fire rating. A couple extra ideas to think about are drywall screws aren’t inserted by hand, and insertion methods.
How do you screw a screw into drywall?
Plaster wall: anything under 20-pounds can be hung with a plastic expansion anchor. Use a molly bolt for anything weighing more than 20-pounds. Drywall: use a threaded anchor screw for anything weighing less than 20-pounds. Anything weighing more should be anchored with a molly bolt. Concrete or brick and mortar walls require expansion anchors.
Another frequent question is “How many screws per sheet of drywall?”.
Sheetrock Panel Size Factors to Consider. Long sheets require fewer seams and cost much less to finish, but are more difficult to install. Long sheets may not fit in tight spaces or through stairwells. Long sheets are significantly heavier to lift and transport. A 4’x8′ 1/2″ sheet of drywall weighs 54 pounds, while a 4’x12′ 1/2″ sheet weighs 82 pounds.